View STG5683_4555654.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STG5683
Low voltage dual SPDTswitch with negative rail capability
Features

Distortion-free negative signal throughput down to VCC-5.5V Wide operating voltage range: VCC (Opr) = 1.65V to 4.5V single supply Ultra low power dissipation: ICC = 0.2A (Max.) at tA = 85C Low "ON" resistance VIN = 0V: RON = 0.5 (max. tA = 25C) at VCC = 4.3V 4.3V tolerant and 1.8V compatible threshold on digital control input at VCC = 1.65 to 3.0V Latch-up performance exceeds 300mA (JESD 17) ESD performance exceeds JESD22 2000-V human-body model (A114-A)
QFN16L (2.6mm x 1.8mm)
Description
The STG5683 is a high-speed CMOS low voltage dual analog S.P.D.T. (Single Pole Dual Throw) SWITCH or 2:1 Multiplexer /Demultiplexer Switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.65V to 4.5V, making this device ideal for portable applications. Additional key features are fast switching speed, Break Before Make Delay Time and Ultra Low Power Consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage.
Figure 1.
Device summary
Order code STG5683QTR Package QFN16L (2.6mm x 1.8mm) Packaging Tape and reel
July 2007
Rev 3
1/16
www.st.com 16
Contents
STG5683
Contents
1 Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 1.2 Pin connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 3
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.1 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4 5 6
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
STG5683
Pin settings
1
1.1
Pin settings
Pin connection
Figure 2. Pin connection (top through view)
NC 16
NC 15
NC 14
Shunt switch
NC 13
1SEL 1S2 D1 1S1
1 2 3 4
Shunt switch
12 11 10 9
2S2 D2 2S1 2SEL
8
5 NC
6 NC
7 VCC
GND
1.2
Pin description
Table 1. Pin description
Pin N 4, 2, 10, 12 3, 11 1, 9 7 8 5,6,13,14,15,16 Symbol 1S1, 1S2, 2S1, 2S2 D1, D2 1SEL, 2SEL VCC GND NC Name and function Independent channels Common channel Control Positive supply voltage Ground (0V) No connect
3/16
Device summary
STG5683
2
Device summary
Figure 3. Input equivalent circuit
D
S2
S1
SEL
Table 2. Truth table
SEL H L
1. Shorted to ground by the shunt switch
Switch S1 ON OFF (1)
Switch S2 OFF (1) ON
4/16
STG5683
Maximum rating
3
Maximum rating
Stressing the device above the rating listed in the "Absolute Maximum Ratings" table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 3. Absolute maximum ratings
Symbol VCC VI VIC VO IIKC IIK IOK IO IOP ICC or IGND PD Tstg TL Supply voltage DC input voltage DC control input voltage DC output voltage DC input diode current on control pin (VSEL<0V) DC input diode current (VSEL<0V) DC output diode current DC output current DC output current peak (pulse at 1ms, 10% duty cycle) DC VCC or ground current Power dissipation at TA = 70C (1) Storage temperature Lead temperature (10 sec) Parameter Value -0.5 to 5.5 - (VCC - 6.0V) to VCC + 0.5 -0.5 to 5.5 - (VCC - 6.0V) to VCC + 0.5 -50 50 20 150 400 100 1120 -65 to 150 300 Unit V V V V mA mA mA mA mA mA mW C C
1. Derate above 70C by 18.5mW/C
5/16
Maximum rating
STG5683
3.1
Recommended operating conditions
Table 4. Recommended operating conditions
Symbol VCC VI VIC VO Top dt/dv Supply voltage(1) Input voltage Control input voltage Output voltage Operating temperature Input rise and fall time control input VCC = 1.65V to 2.7V VCC = 3.0 to 4.3V Parameter Value 1.65 to 4.5 VCC -5.5 to VCC 0 to 4.5 VCC -5.5 to VCC -40 to 85 0 to 20 ns/V 0 to 10 Unit V V V V C
1. Truth Table guaranteed: 1.2V to 4.3V
6/16
STG5683
Electrical characteristics
4
Electrical characteristics
Table 5. DC specifications
Test conditions Symbol Parameter Vcc (V) Min 1.65 -1.95 VIH High level input voltage 2.3-2.5 2.7-3.0 3.3-4.3 1.65-1.95 VIL Low level input voltage 2.3-2.5 2.7-3.0 3.3-4.3 1.8 2.7 RON Switch ON resistance 3.0 3.6 4.3 1.8 ON resistance match between channels (1) 2.7 3.0 3.6 4.3 1.8 ON resistance flatness (2) 2.7 3.0 3.6 4.3 RSH Shunt switch resistance Sn ON State Leakage Current 2.7 S1 or S2 = 10mA VS = -1.2 to 4.3V VD = Open VS = VCC -5.5V to VCC; IS = 100mA VS @ RON Max IS = 100mA VS = VCC -5.5V to VCC; IS = 100mA 3.20 0.77 0.64 0.51 0.45 50 20 15 15 15 3.0 0.50 0.40 0.25 0.16 70 100 A m 0.65VCC 1.0 1.1 1.3 0.5 0.5 0.6 0.7 4.0 0.90 0.80 0.65 0.55 TA = 25C Typ Max Value -40 to 85C Min 0.65VCC 1.4 1.5 1.6 0.5 0.4 V 0.5 0.6 V Max Unit
RON
RFLAT
ION
4.3
-0.1
0.1
-1
1
7/16
Electrical characteristics Table 5. DC specifications (continued)
Test conditions Symbol Parameter Vcc (V) Min ID D ON State Leakage Current SEL Leakage Current Quiescent Supply Current Low Voltage Driving Quiescent Supply Current 4.3 VS = Open VD = 4.3 to -1.2V VSEL=4.3V or GND V1SEL, V2SEL = 1.65V 4.3 V1SEL, V2SEL = 1.80V V1SEL, V2SEL = 2.60V 4.3 VSEL= VCC or GND -0.1 TA = 25C Typ Max 0.1 Value -40 to 85C Min -1
STG5683
Unit
Max 1 A
IIH,IIL
4.3
-0.1 37 33 12
0.1 50 40 20
-1
1 100 50 30
A
ICCLV
A
ICC
50
200
nA
1. Note 1: Ron = max |mSN-nSN|, where m = 1..4 and n = 1..4, N = 1..2 2. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal ranges.
8/16
STG5683
Electrical characteristics
Table 6. AC electrical characteristics (CL = 35pF, RL = 50, tr = tf 5ns)
Test conditions Symbol Parameter Vcc (V) Min 1.65-1.95 tPLH, tPHL Propagation delay 2.3-2.7 3.0-3.3 3.6-4.3 1.65-1.95 tON Turn-ON time 2.3-2.7 3.0-3.3 3.6-4.3 1.65-1.95 tOFF Turn-OFF time 2.3-2.7 3.0-3.3 3.6-4.3 1.65-1.95 tD Break before make time delay 2.3-2.7 3.0-3.3 3.6-4.3 1.65-1.95 Q Charge injection 2.3-2.7 3.0-3.3 3.6-4.3 CL = 100pF VGEN = 0V CL = 35pF RL = 50 VS = VCC\2 1 1 1 1 VS = 1.5V VS = 0.8 VS = 1.5V VS = 0.8V TA = 25C Typ 0.45 0.40 ns 0.30 0.25 180 100 72 58 64 41 34 33 110 58 ns 40 23 16 25 pC 34 46 220 130 95 80 80 60 50 50 ns ns Max Value -40 to 85C Min Max Unit
9/16
Electrical characteristics Table 7. Analog switch characteristics (CL = 5pF, RL = 50, TA = 25C)
Test conditions Symbol Parameter Vcc (V) Min OIRR Xtalk OFF Isolation Crosstalk Total harmonic distortion
(1)
STG5683
Value TA = 25C Typ -55 -60 Max -40 to 85C Min Max dB dB Unit
2.7 - 4.3 VS = 1VRMS, f = 100kHz 2.7 - 4.3 VS = 1VRMS, f = 100kHz RL = 32 VIN = 0.5VPP 2.7 - 4.3 DC Bias = 0 f = 20Hz to 20 kHz 2.7 - 4.3 3.3 RL = 50 Signal = 0dBm
THD
0.01
%
BW CIN
-3dB bandwidth Control pin input capacitance D Port capacitance when switch is enabled
33 6
MHz
pF 3.3 f = 1MHz 290
CD
1. Off Isolation = 20Log10 (VD/VS), VD = output. VS = input to off switch.
10/16
STG5683
Package mechanical data
5
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
11/16
Package mechanical data
STG5683
Table 8. QFN16L (2.6x1.8mm) mechanical data
mm. Dim. Min A A1 b D E e L 0.35 0.45 0 0.15 2.50 1.70 Typ 0.55 0.02 0.20 2.60 1.80 0.40 0.40 0.45 Max 0.60 0.05 0.25 2.70 1.90
Note:
1 2 3 4 5
VFQFPN - Standard for thermally enhanced vey fine pitch quad flat package no leads. The leads size is comprehensive of the thickness of the leads finishing material. Dimensions do not include mold protusion. Package outline exclusive of metal burrs dimensions. Shipping media tape and reel units: 3000 Figure 4. Foot print recommendation
12/16
STG5683 Figure 5. Package information
Package mechanical data
13/16
Package mechanical data Figure 6. QFN16L (2.6mmx1.8mm) tape & reel
STG5683
14/16
STG5683
Revision history
6
Revision history
Table 9. Revision history
Date 27-Apr-2007 04-May-2007 05-Jul-2007 Revision 1 2 3 First release Typo in cover page Table 5 on page 7 updated Changes
15/16
STG5683
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
16/16

▲Up To Search▲

Price & Availability of STG5683

	To Download STG5683 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .